dicas-neve-02The Foam fluid is 98 percent water and two percent surfactant. Surfactants are substances that produce the best effects of snow.

This solution, used in our snow machines, creates a realistic look snowy. The solution is injected with a water pump through a mesh material to generate more realistic artificial snow globe.

The water begins to evaporate in a matter of seconds, which makes the glasses reduce its size and make it lighter until disappear. The chemical surfactant becomes microscopic particles and also disappears. The surfactants used in Foam Fluid formulation of cosmetics are of the highest possible degree. Are hypoallergenic, biodegradable, non-toxic and non-staining.

When machines are used properly, leave no traces of moisture. For years, our products have been used to generate snow effects for millions of visitors to theme parks, nightclubs and productions for television entertainment.

Generate with very large glasses, may have some moisture, which can remove the pigment of some kind of silk. In these cases, the size of the cups has to fit into a small size to give rise to a rapid evaporation.



It is slippery?
The product, when used with the correct configuration, can run continuously without leaving slippery surfaces. This can be improved by establishing the size of the cups so that they evaporate before they touch the ground.

Has a shelf life?
Yes, you can store up to two years without being opened.

What is the difference between the Hi-Foam and Foam?
Foam fluid is ready for use in a snow machine premixed formulation. Fluid Hi-Foam is a concentrated formulation that is not ready for use. It is used in a concentration from 1 to 1.5% with water of excellent quality.
Deionized water is the basis of all our pre-mixed formulations. From its origins Our product is used for the film industry so that if the snow fall on a camera lens, do not leave tracks or marks. Given that this formulation did not have any chemical, dried and leaves the film.

dicas-neve-01Can I use regular tap water?
If your case does not require the use of a movie camera note that the tap water that has hard use agents that can make the product lower your income. In this case, just use premix Or. Fluid Foam S.A..

U.S.A. Hi-Foam Fluid Concentrate – Warning!
Please read before mixing this product with water instructions mixed, the concentration can be up to 1 or 1.5% of the minimum product of excellent quality water, this will depend on the success of its effect. We recommend the use of deionized water.
Running water, potable water or well water can be used with the following caveats: Some waters contain high mineral content and can dramatically reduce the production of snow. In addition, these minerals will not produce a brilliant white scale. If deionized water is not available, use distilled water. Make sure you adhere to the proportions of the mixture.
If you have a question or a story to tell, please do come to our email.